DTT15

High Gloss Thermal Transfer PET labels
Weight 71 g/m²
Thickness 129 μm
Adhesive type Permanent acrylic
Glansmeting 60° (fs) 65% ASTM D2457
Opacity 81% ISO 2471
Service temperature -40 °C tot 150 °C (aanbrengen bij > 5 °C)

DTT15 is a high-quality high gloss PET label material which is used for product labels, price labels and other retail applications. This PET film from Diamondlabels has a very beautiful and high-quality glossy finish. The permanent acrylic adhesive ensures optimal adhesion on many surfaces. For optimal printing on these labels, use a Resin Thermal Transfer […]

Read More…

View material

DTT70

Mat Thermal Transfer polyester label material for chemical application
Weight 145 g/m²
Thickness 118 μm
Adhesive type Extra permanent acrylic

DTT70 is a polyester label material especially for demanding applications such as chemicals. The satin-matte Thermal Transfer material offers a high resistance to various environmental influences. When using a correct TT ribbon, such as the Godex GRS945, the printed labels are resistant to solvents and most cleaners. The extra permanent acrylic adhesive provides a good […]

Read More…

View material

DTT26

PET Matt silver outdoor TT label
Weight 71 g/m2
Thickness 51 micron
Adhesive type Radiation-cured UV-Acrylic extra permanent
Adhesive weight 25 g/m2

DTT26 from Diamondlabels is distinguished by the matt silver appearance and very high resistance to a wide range of influences The material is very suitable for outdoor use due to its high UV resistance. The label’s service life is extremely good even in the most demanding outdoor applications. In combination with the right transfer ribbon […]

Read More…

View material

DTT38

High-quality Thermal Transfer PE with special bonding
Weight 80 g/m2
Thickness 105 μm
Adhesive type Extra permanent, rubber based

The DTT38 from Diamondlabels is a versatile PE Thermal Transfer label. The special rubber-based adhesive provides extra permanent adhesion on many surfaces. As a result, it can also be used on packaging and surfaces where other adhesive types often fail, such as wood and HDPE packaging. The Thermal Transfer suitable PE requires a correct WAX […]

Read More…

View material

DTT25

Extra thick and sturdy mat PP tag
Weight 183 g/m² ± 3
Thickness 150 microns ± 3
Approvals Approved for direct food contact (FDA 21 CFR 177-1520)

The DTT25 from Diamondlabels is an extra thick and sturdy ticket material for Thermal Transfer application. The 150 micron thick synthetic tag material (PP) without adhesive is very strong and in combination with the right transfer ribbons very suitable for outdoor use and resistant to many common chemicals. Due to the strong material, this ticket […]

Read More…

View material

DTT23

Glossy Thermal Transfer PP with pressure sensitive adhesive
Weight 53,3 g/m² ± 3
Thickness 60 Mu± 3
Service temperature -40 to +70 ºC (apply at > -10 ºC)
Adhesive type Hot-melt rubber based, permanent
Gloss rating 85 % (ASTM D2457)

The DTT23 is a glossy PP material for Thermal Transfer printing applications. The high-quality glossy PP from Diamondlabels is ideal for simple black and white product labeling and guarantees an optimal thermal transfer print of high quality. The Special adhesive on rubber base is suitable for use with freezers and can already be applied at […]

Read More…

View material

DTT22

UV resistant matt silver PET foil
Weight 71 g/m²
Thickness 51 μm
Adhesive type Radiation-cured UV-Acrylic, extra permanent
Adhesive weight 25 g/m²
Service temperature -40 °C to 200 °C

The DTT22 is an extra permanent PET film with a matt silver finish The high temperature range and the beautiful matt silver finish of this Thermal Transfer material, combined with an strong extra permanent adhesive, this PET Thermal Transfer film is very suitable for many applications where readability and long life are important. When used […]

Read More…

View material

DTT21

Thermal Transfer semi-gloss PET film
Weight 71 g/m²
Thickness 50 μm
Opacity 81 %
Gloss rating 65 % (ASTM D2457)
Adhesive type Acrylic based adhesive, permanent

Affordable semi-gloss PET material for standard applications This PET film has a semi-gloss to a satin glossy finish. This ensures that this material is less likely to become contaminated by environmental influences. The material is resistant to UV light, heat up to 100 degrees Celsius and moisture. For this material use a transfer ribbon of […]

Read More…

View material

DTT01H

Wood-free matt TT paper with high tack adheisve
Weight 70 ± 3 g/m²
Thickness 70 ± 4 micron
Opacity 87%
Adhesive type Rubber based extra High-Tack adhesive
Service temperature -40 to +70 ºC

The DTT01H is a simple matte paper suitable for Thermal Transfer with High-Tack adhesive type. The rubber based adhesive has a very high initial tack (high tack) and a standard permanent final bond. Due to the thickness and rubber based adhesive, the adhesive is able to adhere well to rougher surfaces. This paper Thermal Transfer […]

Read More…

View material

DIA400O

Inkjet, High Gloss Paper, Opaque Permanent adhesive
Weight 86 (±4) g/m2
Thickness 102 (±6) μm
Opacity 87 (±3) %
Smoothness (fs) 110 (±6) sec
CIE Whiteness (fs) 155 (±6) %
Service temperature -20°C to +80°C (apply at > 5°C)

High-quality glossy inkjet paper with (blackout) opaque adhesive. The product is the same as the DIA400 glossy paper with permanent adhesive, only the transparent adhesive has been replaced by a dark gray adhesive. This makes the label ideal for masking misprints on packaging and relabeling products in case of changes in regulations. Furthermore, the Glossy […]

Read More…

View material

3100T-PP

Shiny PP plastic label material from Zebra
Thickness Permanent acrylic

Zebra original PP plastic labels with glossy finish […]

Read More…

View material

3100T-PO

Zebra PolyO ™ 3100T satin glossy plastic label material
Plastic type Polyolefin (PO)
Adhesive type Permantent

Special PO label material for application on difficult surfaces. According to Zebra’s specifications, this plastic material is ideal for placing on difficult surfaces such as round and rough surfaces. The print is provided that it is printed with a matching transfer ribbon resistant to common chemicals. […]

Read More…

View material
preloader